Home » Skating Blog » Nose And Tail Of A Skateboard

Nose And Tail Of A Skateboard

Your skateboard may have the same nose and tail as a skateboard. Because some of the skateboards have the same shapes on both ends. And you can take any side as nose and tail. But different angles and shapes describe the difference between the nose and tail skateboard.

The nose of the skateboard can be detected by the coloring hardware. In this way, the tail of a skateboard will be on the other side of the skateboard. As the nose is already known by the hardware. Also, we will find the nose and tail by the size, length, and steepness of both ends. Using the colored wheels and grip tape, the nose and tail can be detected.

Let us give some amazing experienced tips on recognizing a beginner’s nose and tail skateboard.

How To Tell The Front Of A Skateboard

One of the major differences that can easily determine the front and back of a skateboard is the height. Yes, the front of the skateboard will be longer and higher from the surface if you compare it with the back. Well, the nose and tail are also known as the front and back of the skateboard.

There are some authentic methods to disclose the nose and tail of the skateboard easily. You will be able to detect with the graphics on the board or without any identical sign on the board.

  • Check the height of both sides
  • Analyze the graphics directly on the board
  • Colored hardware
  • Colored wheel
  • Indicated grip tape

1- Determining Nose And Tail By checking Height And Angles

When it comes to analyzing the angles and heights of both ends. Sometimes, it becomes difficult, especially for beginners. Because spotting a little bit of divergence isn’t always an easy task. But leads you to get the job done and let the confusion finish forever.

Let’s create a situation, your skateboard doesn’t have graphics or other identical signs. Then you will find the nose and tail of a skateboard by analyzing the height and steeper angle. The nose of the skateboard will have a longer height than the skateboard tail. Also, there will be an upward steeper curve.

On the other hand, you will find the tail shorter as well as less steep as compared to the nose of the board. The tail keeps less distance from the ground but the nose contains more distance. This method takes time especially when you’re giving it the first try.

2- Check The Graphics (skateboard tail vs nose)

The second method that needs your attention to determine the nose and tail of the skateboard is taking an idea from graphics. The printed graphics via heat transfer on the bottom of the board assists in detecting. As the logos are placed onto the tail of the skateboard and go towards the board’s nose.

Most of the time, the graphics are present on the board which helps in distinguishing the deviation. So, if there are no text indications. You can judge both ends by this method.

3- Coloring Hardware

Some brands prefer this technique for detecting the nose and tail of skateboards. Because it is super easy and requires no concentration or hard work. You just need to find the bolts and analyze whether they are colored or not.

If the bolts are colored, congrats you have found the front of the skateboard. And the other side is the tail. As long as you skate, the hardware starts losing its bright colors because of the paint. And you won’t be able to catch the nose and tail of a skateboard clearly.

I would suggest every starter buy colored bolts once the nose and tail of the skateboard are recognized. You will not be needed to check graphics or calculate the height from the ground. Just pick up the board and see what additional color you have added to the nose. And then start riding the board.

4- Colored wheel

All of the above methods have been used by all of us and these are worth it to identify front and back. Also, one of the methods is using colored wheels on one side of the board. I have seen the colored wheels ridden by well-known skateboarders in my childhood. And this is still going on for a better cause and easiness.

If you can afford to have a new set of wheels, better to get the colored wheels. When you don’t have enough bucks, try to use the first couple of methods. And detect the front and back by calculating and analyzing the height from the surface and graphics.

5- Indicated grip tape

You can use anything to mark onto the grip tape for identification. But digging up the front and back is essential before adhering to the grip tape. Make sure to use long-lasting material to stick with grip tape. Because the material can take off while riding the skateboard.

Skateboard Shapes

Some common and widely used skateboard shapes are Popsicles and Old school skateboards. Popsicle boards are used for performing tricks all over the world. Even it makes the difficult for the intermediates to recognize the nose and tail.

But the first method will help you in determining the clear difference. The old-school skateboards have got rounded and flat noses. While the tail is is having skywards curves.

Difference Between the Nose and Tail of a Skateboard

The difference between the nose and tail of a skateboard is the length and steeper angles. The nose contains a higher length and a better steeper angle. The nose has got more elevation from the ground than the tail of the board. And manufacturers make the lesser height and steepness for the tail.

Popping the board is easy when you have a shorter tail. And the longer nose makes it effortless for the pro skateboarders to do the flip tricks. There are a lot of skaters that prefer doing ollies. And they have used the nose as a tail to fulfill their desires. But it depends on your proclivity which direction you want to choose.

Twin Nose Skateboard

Twin tail and nose skateboards have the exact shapes and ends. These skateboarders know that riding can be done without selecting the nose and tail of the skateboard. Both ends have got a symmetrical shape.


The front of a skateboard is the nose and the back is the tail. You can identify by the following methods, checking height and size, graphics and logos, colored wheels and hardware, and marked grip tape.

Not all skateboards are symmetrical. there are skateboards that have different ends. Because every end is used by different feet for dissimilar purposes as well.

Final Thoughts

The nose and tail of a skateboard can be identified by checking the size of both ends. If there is more height and length for one end, then this is the nose and the other is the tail. You can use the graphics or logos to detect if the size method hasn’t worked.

I hope the guide has helped you a lot with the deep and various methods. You will not be needed to go further because the first method is very strong and can easily spot the differences.

Rate this post
Sharing Is Caring

Leave a Comment